Greenbyte Documentation

Log on device access (WTSR compliant)
Log on device access from Plan > Site Access

Follow these steps to log on device access from Plan > Site Access. Repeat these steps for all devices that will be accessed during the site access event.

  1. Go to Plan > Site Access.

  2. Select the site access event which should serve as the parent site access for the device access. You can either click on the row of the site access event or click View.

  3. Go down to the Device Access section and click Log Device Access. A Log Device Access dialog will appear.

  4. Select the devices for device access. The parent device access is automatically preselected and cannot be changed.

    Note

    We recommend that you log a device access for one wind turbine at a time for best traceability and safety.

  5. Select the personnel who will be granted site access (mandatory).

  6. Select which task the site access event relates to, or create a new task.

  7. Enable the Transfer of Control (TOC) toggle if you need to adhere to the UK WTSR standards.

    Note

    If you enable the TOC toggle, you will need to also select procedures for the planned work.

  8. Select the start time and expected end time. When the site access has not been logged off at the expected end time, the site access marker color changes to red.

  9. Enter any comments related to the site access event.

  10. Click Save.

Log on device access from the sidebar

Follow these steps to log on device access from the sidebar. Repeat these steps for all devices that will be accessed during the site access event.

  1. Click the three dot menu of the specific wind turbine and select Log Device Access. A Log Device Access dialog will appear.

  2. Select the site access event which should serve as the parent site access for the device access.

  3. Select the devices for device access. The parent device access is automatically preselected and cannot be changed.

    Note

    We recommend that you log a device access for one wind turbine at a time for best traceability and safety.

  4. Select the personnel who will be granted site access (mandatory).

  5. Select which task the site access event relates to, or create a new task.

  6. Enable the Transfer of Control (TOC) toggle if you need to adhere to the UK WTSR standards.

    Note

    If you enable the TOC toggle, you will need to also select procedures for the planned work.

  7. Select the start time and expected end time. When the site access has not been logged off at the expected end time, the site access marker color changes to red.

  8. Enter any comments related to the site access event.

  9. Click Save.